Alamo BUSH HOG RMB 1660, Operator'S Manual

Page: 115 / 230

ASSEMBLY
RMB 1660 01/22 Assembly Section 3-15
© 2022 Alamo Group Inc.
ASSEMBL
Y Reverse tractor squarely and centrally to the
machine set tractor lower links to a height that
will permit attachment to lower frame
attachment points. Reverse fully in to attachment points then
raise the tractor linkage until it locks onto the
lower link balls on both sides of the machine.
A
djust top link to position the stabiliser tongue
for attachment to the tractors top link clevis.
NOTE: Alternative tongues for stabilisers are
Attach stabiliser tongue to highest suitable
clevis position that does not interfere with or
foul tractor components secure with pin and
lock pin.
IMPORTANT: Rear of stabiliser tongue should be as close as possible to the bottom of the
stabiliser slot with the machine at rest on the ground – if required change the stabiliser lower
attachment points and/or clevis attachment position to achieve this setting. This is a vital
requirement to ensure the tongue is located at the slots mid-point when the machine is raised to
the work position thus allowing float in each direction.