Alamo Industrial Great White M8000MD, Operator'S Manual, Page: 8 / 86

Safety Section 1-5
SAFETY
©
2004
Alamo Group Inc.
SAFETY
M-8000MD 12/04
WARNING! Avoid contact with hot surfaces of the engine or muffler. Use gloves
and eye protection when servicing hot components. Contact with a hot
surface or fluid can cause serious injury from burns or scalding.
(SG-38)
WARNING! The rotating parts of this machine continue to rotate a short period of time
even after the Power Unit has been turned off. The operator should
remain in his seat for 20 seconds AFTER the parking brake has been set,
the auxiliary hydraulics disengaged, the Power Unit turned off, and all
evidence of rotation has ceased.
(SPU-4)
“Wait a minute...Save a life!”
DANGER!
Do Not approach the front of the snow blower while the fan is rotating.
Contact with the rotating fan can result in serious injury or even death.
Stay away until all motion has stopped and the snow blower is securely
blocked up before removing material, performing service, and making
repairs.
(
SSB-05
a
)
DANGER!
Do not put hands or feet near the rotating fan. Fan contact can result
in serious injury or even death. Stay away until all motion has stopped
and the snow blower is securely blocked up before removing material,
performing service, and making repairs.
(SSB-6)
DANGER! Do not operate the implement while wearing loose fitting clothing.
Entanglement of the clothing with the rotating elements can result in
serious injury or even death. Stay clear of all rotating elements at all
times.
(SSP-3)
WARNING!
Avoid contact with hot surfaces including hydraulic oil tanks, pumps,
motors, valves and hose connections. Relieve hydraulic pressure
before performing maintenance or repairs. Use gloves and eye
protection when servicing hot components. Contact with a hot surface
or fluid can cause serious injury from burns or scalding.
(SG-34)
DANGER!
DO NOT operate this Implement on a Power Unit that is not properly
maintained. Should a mechanical or Power Unit control failure occur
while operating, immediately shut down the Power Unit and perform
repairs before resuming operation. Serious injury and possible death
could occur from not maintaining this Implement and Power Unit in
good operating condition.
(SPU-38)