Alamo Industrial Eagle 14, Operator'S Manual, Page: 103 / 186

OPERATION
Eagle 20 03/09 Operation Section 4-3
© 2009 Alamo Group Inc.
OPERA
T
ION
1.
Standard Equipment and Specifications
Eagle 20 Eagle 14
Cutting Width 240” 162”
Transport Width 115” 106”
Overall Width 248” 170”
Overall Lenth 216” 216”
Cutting Height 2”-14-3/4” 2”-14-3/4”
Hitch Pull Pull
Blade Overlap 6” 6”
Blade Carrier Reinforced Pan or Bar
HP Required(Min.) 75 HP 80 HP
Gearbox Rating EXTRA EQUIPMENT
Power Divider 180 HP Open or Closed Center Three-Spool Valve
Center Wing 140 HP Valve Mounting Kit
Gerabox Limited Warranty 5 year Ball
Output Shaft Diameter 2-3/8” Pintle Hitch(Requires Drawbar Modification)
Blade Tip Speed: Baffle Kit Assembly
Center 540 RPM 14,369 FPM Auxilary Wheels Spindle Kit(For Dual Wheels on
1000 RPM 15,062 FPM Wings)
Wings 540 RPM 16,524 FPM Shredding Kit(Bar Carrier Units Only)
1000 RPM 13,980 FPM
Cutting Capacity(Max.) 2” OPTIONAL EQUIPMENT
Driveline Size Single or Double Front & Rear Chain Guards
Main CAT 5 HD 540 or 1000 RPM
Wings CAT 6 HD Constant Velocity or Non C/V Main Driveline
Driveline Limited Warranty 2 Year Pan or Bar Blade Carriers
Driveline Protection Slip Clutch Laminated, Foam-Filled Used Airplane, Used
Deck Thickness 10 Ga. Plane, Implement, or Recapped Used Airplane
Side Skirts: Replaceable 1/4”x10-1/2” Tire or Wheel
Replaceable Skid Shoes Standard Standard
Wing Flex 90 Degrees up, 22 Degrees Down
Safety Deflectors Standard Standard
Tractor Static Vertical
Drawbar Load Rating(Min.) 2650 lbs. * 2600 lbs. *
Deck Rings Standard Standard
*Safety Deflectors are standard equipment. Single and double chain guards are available as extra equipment
at extra cost. Alamo Industrial recommends mowers be equipped with deflectors or double chain guards for all
mowing purposes. Single chain guards may be used for agriculture purposes only and are specifically not
recommended for highway, right-of-way, parks or greenbelt mowing.
**Ratings based on actual field performance.