manualshive.com logo in svg

Alamo Industrial A-Boom, Operator'S Manual

Share
Download
Alamo Industrial A-Boom Operator'S Manual Download Page 118

OPERATION

A-BOOM   03/09

Operation Section 3-22

©2009 Alamo Group Inc.

OPERA

T

ION

7.3 Cutting Component Inspection

Inspect blade pan and blade assembly  for the following: 

OPS-U-0031

Inspect the Blades daily for abnormal wear. REPLACE BOTH BLADES on th at carrier

IMMEDIATELY if either blade has:

•

Become bent or deformed from it’s original shape or

•

Any cracks are visible, or 

•

Deep gouges in the blade’s surface are persent, or

•

Gouges or chipped areas in the cutting edge are larger than 1/2”(12.7mm), or 

•

The material on the leading edge has been worn away by more than 1/2(12.7mm)”

Failure to replace abnormally worn blades may lead to catastrophic failure of the blades and ejection of the

broken part with tremendous force which may cause serious bodily injury or death.  

OPS-U-0032

Summary of Contents for A-Boom





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands