AL-KO Solo 6646, Instructions For Use Manual

Page: 34 / 536

GB
34 6646 | 6651 | 6656
Translation of the original instructions for use
TRANSLATION OF THE ORIGINAL INSTRUCTIONS FOR USE
Contents
1 About these operating instructions .......... 35
1.1 Symbols on the title page ................... 35
1.2 Legends and signal words ................. 35
2 Product description .................................. 35
2.1 Designated use .................................. 35
2.2 Possible foreseeable misuse ............. 35
2.3 Residual risks ..................................... 35
2.4 Safety and protective devices ............ 36
2.5 Symbols on the appliance .................. 36
2.6 Scope of supply.................................. 37
2.7 Product overview (01) ........................ 37
3 Safety instructions ................................... 38
3.1 Chain saw safety warnings ................ 38
3.2 Causes and operator prevention of
kickback ............................................. 39
3.3 Safety information when working ....... 39
3.3.1 Operator ...................................... 39
3.3.2 Operating times ........................... 40
3.3.3 Working with the chain saw ......... 40
3.3.4 Vibration load............................... 40
3.3.5 Noise pollution ............................. 41
3.3.6 Handling of petrol and oil............. 41
3.3.7 Safety of persons, animals and
property ....................................... 41
4 Assembly ................................................. 42
4.1 Assembly of the guide rail and the
saw chain (02 to 06) ........................... 42
5 Start-up .................................................... 43
5.1 Fuel .................................................... 43
5.1.1 Mixing fuel ................................... 43
5.2 Chain lubricant ................................... 43
5.3 Filling with service products (07) ........ 44
5.4 Check the chain tension (06, 08) ....... 44
5.5 Checking the chain brake (09) ........... 44
6 Operation ................................................. 44
6.1 Switching the engine on and off ......... 45
6.1.1 Starting the engine (10, 11) ......... 45
6.1.2 Switching off the motor (12) ......... 45
6.2 At the end of a work session .............. 46
6.3 Changing between normal/summer
and winter operation (29).................... 46
7 Working behaviour and working tech-
nique.......................................................... 46
7.1 Using the bumper spike (13) .............. 47
7.2 Felling trees (14, 15)........................... 47
7.3 Delimbing (16) .................................... 48
7.4 Cross-cutting (17, 18, 19) ................... 48
7.5 Cutting converted timber .................... 48
8 Maintenance and care............................... 48
8.1 Removing/remounting the air filter
cover (20) ........................................... 49
8.2 Cleaning the air filter (21) ................... 49
8.3 Checking/replacing the spark plug
(22, 23) ............................................... 49
8.4 Guide rail (25, 27) ............................... 50
8.5 Sharpening the saw chain (24) ........... 50
8.6 Checking the chain lubrication (26) .... 50
8.7 Adjusting the chain lubrication (28) .... 51
8.8 Checking a standstill when the saw
chain is running in idle ........................ 51
8.9 Setting the idling speed on the carbu-
rettor ................................................... 51
8.10 Chain maintenance table .................... 51
8.11 Maintenance schedule........................ 52
9 Help in case of malfunction ....................... 54
10 Transport ................................................... 55
11 Storage...................................................... 55
12 Disposal..................................................... 55
13 Technical data ........................................... 55
14 After-Sales / Service.................................. 58
15 Guarantee ................................................. 58