AL-KO Solo 6646, Instructions For Use Manual

Page: 37 / 536

2500160_a 37
Product description
Symbol Meaning
Press the engine switch; set the
switch to the "STOP" position – the
engine will be switched off immedi-
ately.
Location : On the left side of the
rear handle
Using the choke knob: Turn the
choke knob anticlockwise to close
the choke. When the choke closes,
turn the choke clockwise to open
the choke again.
Location : Air filter cover
Adjusting the oil pump: For a stron-
ger flow of chain oil, use a screw-
driver to turn the rod in the direction
of the arrow until the MAX position
is reached. For a reduced flow of
chain oil, use a screwdriver to turn
the rod in the direction of the arrow
until the MIN position is reached.
Location : Bottom of the drive unit
The screw under the "H" mark is
used to adjust the mixture at high
speed.
Location : On the top right side of
the rear handle
The screw under the "L" mark is
used to adjust the mixture at low
speed.
Location : On the top right side of
the rear handle
The screw above the “T” mark
serves to adjust the idle speed.
Location : On the top right side of
the rear handle
Indicates the direction in which the
chain brake is released (white ar-
row) or depressed (black arrow).
Location : On top of the sprocket
guard
Symbol Meaning
Indicates the direction in which the
chain is mounted.
Location : Front side of the guide
rail
Press the decompression button to
open the decompression valve.
Guaranteed sound level:
■
6646: 115 dB(A)
■
6651 and 6656: 116 dB(A)
2.6 Scope of supply
After unpacking, check that all the parts have
been delivered.
1 2
3
4
6
7
8
5
No. Component
1 Chain bar
2 Saw chain
3 Petrol chain saws
4 Protective cover of the guide rail
5 File
6 Screwdriver
7 Combination spanner
8 Operating instructions
2.7 Product overview (01)
No. Component
1 Chain bar
2 Saw chain