AL-KO Solo 6646, Instructions For Use Manual

Page: 41 / 536

2500160_a 41
Safety instructions
use of the tool. Estimate the stress and plan
appropriate work breaks. This considerably
reduces stress due to vibration over the en-
tire working time.
■
Extensive use of the tool exposes the opera-
tor to vibrations, which can lead to circulatory
issues ("white fingers"). To avoid this risk,
wear gloves and keep your hands warm. If
any symptoms of "white fingers" occur, im-
mediately consult a physician. These symp-
toms include: Numbness, loss of feeling, tin-
gling, itching, pain, reduced muscular
strength, changes in the colour or condition
of the skin. Normally these conditions affect
the fingers, hands or pulse. The risk increas-
es at low temperatures (below approx 10°C).
■
Take long breaks during your working day so
you can recover from the noise and the vibra-
tions. Plan your work in such a way that the
use of appliances that generate strong vibra-
tions is spread over several days.
■
If you notice an unpleasant sensation or disc-
olouration of the skin on your hands when us-
ing the tool, stop work immediately. Take suf-
ficient work breaks. Without sufficient breaks,
a hand/arm vibration syndrome can occur.
■
Minimise your risk of being exposed to vibra-
tions. Maintain the tool according to the in-
structions in the operating instructions.
■
If the tool is used frequently, contact your
dealer to purchase anti-vibration accessories
(e.g. handles).
■
Define how the vibration load can be limited
in a work plan.
3.3.5 Noise pollution
A certain level of noise exposure from this appli-
ance is inevitable. Carry out noisy work at ap-
proved and specified time periods. Observe rest
periods as necessary and restrict the duration of
the work to a minimum. For your personal protec-
tion and protection of persons in the vicinity, ap-
propriate hearing protection must be worn.
3.3.6 Handling of petrol and oil
DANGER! Risk of explosion and fire. An
escaping petrol/air mixture can cause an explo-
sive atmosphere. Deflagration, explosion and fire
can lead to serious and even fatal injuries if fuel
is not handled properly.
■
Do not smoke when dealing with petrol.
■
Only handle petrol out of doors and never in
enclosed spaces.
■
It is essential to heed the code of conduct
stated below.
■
Only transport and store petrol and oil in con-
tainers approved for that purpose. Ensure
that children have no access to stored petrol
and oil.
■
In order to avoid ground contamination (envi-
ronmental protection) when filling, ensure
that no petrol or oil enters the soil. Use a fun-
nel for filling.
■
Never fill the appliance in enclosed spaces.
Petrol vapours may gather at ground level,
and thereby result in a deflagration or even
an explosion.
■
Immediately wipe any spilled petrol off the
appliance and the ground. Allow textiles used
to wipe off petrol to dry in a well ventilated
place before disposing of them. Otherwise,
sudden self-ignition may occur.
■
If petrol has been spilled, petrol vapours oc-
cur. For this reason, do not start the appli-
ance at the same location but at least 3 m
away.
■
Avoid skin contact with mineral oil products.
Do not inhale petrol vapours. When filling, al-
ways wear protective gloves. Change and
clean protective clothing regularly.
■
Ensure that your clothing does not come into
contact with petrol. If petrol has got onto your
clothing, change it immediately.
■
Never fill the appliance while the engine is
running or hot.
3.3.7 Safety of persons, animals and
property
■
Use the appliance only for the purposes for
which it is intended. Any non-intended use
can lead to injury and property damage.
■
Switch on the appliance only when there are
no persons or animals in the working area.