AL-KO Robolinho 100, Manual

Page: 30 / 168

en
Program menu
30 Robolinho
©
100
[All days] menu item
1. Select the [All days] menu item with the corresponding [arrow key] (3-3) and confirm with the [mul-
tifunction key right] (3-5).
2. Press the [down arrow key] (3-3) until [Change] is active.
3. Select the required menu item with the corresponding [arrow key] (3-3) and confirm with the [multi-
function key right] (3-5).
Explanation of symbols
(1)
Menu item All days
(2) Menu item Day of week
[-] Mowing window deactivated
[R]
Edge mowing
The Robolinho mows on the right along the boundary
cable. After mowing the edges, the Robolinho conti-
nues mowing the marked-out area.
(3)
[M] Normal mowing
(4) Start time The Robolinho departs from the base station at the
selected time for mowing.
(5) End time The Robolinho moves back to the base station at the
selected time.
[0 - 9]
Fixed entry point
The Robolinho departs from the selected entry point at
the selected time for mowing.
(6)
[?]
Automatic entry point
The entry points are changed automatically (recom-
mended setting).
SETTING MENU
Set the data, time, language and recalibrate, see
start-up.
Activate or deactivate the button tones
1. Select [button tones].
2. Confirm with the [multifunction key right] (3-5).
3. Activate or deactivate the button tones with
the [multifunction key right] (3-5).
4. Confirm the corresponding selection with the
[menu key] (3-8).
Changing the display contrast
1 Select [Display contrast].
2 Select [Display contrast] with the [arrow keys]
(3-3) and confirm with the [multifunction key
right] (3-5).
3 Confirm the selection with the [menu key]
(3-8) and return to the main menu.
Restoring factory settings
1 Select [Factory settings].
2 Enter the PIN code again and confirm.
3 Confirm the selection with the [menu key]
(3-8) and return to the main menu.
INFORMATION MENU
The information menu is used for calling up the
software status, hardware status, current settings
(program info) and faults. No settings can be
made in this menu.
Faults
Display of date, time and fault code with fault mes-
sage. All fault messages since start-up are listed.
MOWING TIPS
Cutting height at a constant 3 - 6 cm, do not
mow off more than half of the lawn height.
Adjust the mowing times accordingly.