GB
24
PW 1850
Troubleshooting
Malfunction
Cause
Remedy
The appliance switches
on, but does not draw in
water or the water pres-
sure is too low.
Suction hose is not securely
connected to the appliance.
Push suction hose firmly onto the appli-
ance.
Appliance is too high above
the open vessel.
Hold the appliance lower.
Suction filter not immersed in
water.
Immerse the suction filter in the water.
Suction hose is kinked.
Straighten the suction hose.
Filter insert on appliance
and/or suction filter is/are
clogged.
Clean filter insert and suction filter.
Water has frozen.
Warm the water. Do not operate the ap-
pliance at temperatures below 0°C.
Appliance sprays too lit-
tle water.
Appliance is in Eco mode.
Switch off Eco mode.
Multi-spray nozzle is
leaking.
The multi-spray nozzle is not
turned exactly to the desired
spray pattern symbol.
Turn the multi-spray nozzle so that
spray pattern symbol and selection
mark are exactly aligned.
Water pressure rises
suddenly.
Multi-spray nozzle, filter in-
sert or suction filter is/are
clogged.
Clean multi-spray nozzle, filter insert
and suction filter.
Water runs out of the ap-
pliance after switching
off.
There is still water in the ap-
pliance.
Allow the water to drain completely out
of the appliance.
Detergent bottle does not
spray cleaning agent.
Detergent bottle attachment
is clogged.
Clean the attachment.
Appliance does not start.
Battery is not completely
pushed in.
Push battery into the battery slot until it
engages.
Battery is flat.
Recharge the battery or replace it with a
new battery.
Battery is defective.
Replace the battery.
Appliance stops automat-
ically.
Battery is flat.
Recharge the battery or replace it with a
new battery.
Multi-spray nozzle, filter in-
sert or suction filter is/are
clogged.
Clean multi-spray nozzle, filter insert
and suction filter.
Water is not sprayed with
a constant pressure.
The appliance is drawing in
extraneous air.
Check the connections of the suction
hose. Push on the suction hose secure-
ly.
