443180_a
23
Maintenance and care
Set-
ting
Nozzle function
Spot cleaning with heavy soiling (11)
Surface cleaning with heavy soiling (12)
Surface cleaning with moderate soiling
(12)
Surface cleaning with light soiling (12)
Watering (13)
7.2
Regulating cleaning agent at detergent
bottle (14)
1. Increase the amount of cleaning agent: Turn
rotary knob (14/1) in direction
Max
.
2. Reduce the amount of cleaning agent: Turn
rotary knob (14/1) in direction
Min
.
7.3
Starting and stopping the appliance (15)
NOTE
When operated with an open vessel,
the suction hose is not yet filled with water at the
start of work. It can take up to 30 seconds before
water is sprayed.
Starting the appliance
1. Put on a mask to avoid inhaling spray mist.
2. Direct the appliance towards the surface to
be cleaned.
3. Press and hold unlocking button (15/1).
4. Press and hold ON/OFF switch (15/2). The
appliance starts. The unlocking button can be
released. After a few seconds, the appliance
starts to spray water or soapy water.
Stopping the appliance
1. Release the ON/OFF switch.
7.4
Activating Eco mode (16)
The "Eco mode” button is used to activate the
water saving function. This is particularly expedi-
ent in combination with the surface cleaning set-
ting of the multi-function spray nozzle.
Precondition:
The appliance starts.
Switching on Eco mode
1. While holding ON/OFF switch (16/1) pressed,
press "Eco mode” button (16/2). The appli-
ance sprays less water.
Switching off Eco mode
1. Press the “Eco mode” button again.
8
MAINTENANCE AND CARE
WARNING! Risk of injury.
Always switch
off the appliance before starting, adjustment,
maintenance, care and cleaning work. Remove
the rechargeable battery.
8.1
Cleaning filter insert in hose connection
(17)
Removing and cleaning hose connection and
filter insert
1. Remove the battery.
2. Unscrew hose connection (17/1) (using a 17
mm wrench).
3. Remove filter insert (17/2).
4. Rinse hose connection and filter insert with
clean water or descale, if necessary.
Installing filter insert and hose connection
again
1. Press the clean filter insert into the hose con-
nection.
2. Screw hose connection onto the intake port
(using a 17 mm wrench).
8.2
Cleaning the suction filter (18, 19)
Removing and cleaning the suction filter
1. Pull (18/a) quick-coupler (18/1) towards suc-
tion hose (18/2).
2. Pull off (18/b) suction filter (18/3).
3. Unscrew filter housing (19/1) from intake port
(19/2).
4. Remove fine screen (19/3).
5. Rinse all parts with clean water or descale, if
necessary.
Installing suction filter again
1. Assembly the suction filter.
2. Push the suction filter onto the suction hose.
9
TROUBLESHOOTING
NOTE
For malfunctions that are not listed in
this table or that you cannot resolve yourself,
please contact our customer service.
