English
21
Dispose off the used flat-folded filter in
a dust-tight bag according to the statu-
tory provisions.
Remove the dirt that has accumulated
on the pure air side.
Insert new flat-folded filter.
Close the filter door, it must lock into
place.
–
The device is fitted with a paper filter
bag with locking slide, order no. 6.904-
208.0 (5 pcs).
–
If the paper filter bag is full and the min-
imum volume flow is fallen short of it
has to be replaced.
–
At the end of its lifetime the appliance is
to be disposed of according to the stat-
utory provisions.
Properly insert the connection socket in
the suction connection.
Push in the connection socket until it
locks into place.
Turn the suction connection with the
connection socket to the right to close it
tightly.
Note:
The accurate fit is ensured by means
of a "bayonet connection".
Pull out the paper filter bag to the rear
(1).
Lift the locking slide (2) and tightly close
the paper filter bag when removing it
(see label on the filter element packag-
ing).
Dispose of the used filter element in a
dust-tight bag according to the statutory
provisions.
Put the disposal bag over.
Pull the opening of the disposal bag out
toward the back over the suction sup-
port.
Tightly seal the disposal bag with clo-
sure strips underneath the opening.
Dispose of the disposal bag according
to the local provisions.
Exchanging the paper filter bag/dis-
posal bag
Paper filter bag
Dust disposal bag