English
19
Set the minimum volume flow at the ro-
tary switch (1).
The scale (2) displays the suction hose
section.
Note:
The different suction hose sections
are required to allow an adjustment to the
connection sections of the processing
tools.
Note:
To use the appliance as dedusting
device for the mobile operation (processing
tool connected to the vacuum cleaner) the
built-in monitoring must be adjusted to the
connected processing tool (dust-generat-
ing device). This means that the user must
be warned if the minimum volume flow of
20 m/s that is required for the suction is fall-
en short of.
Note:
Please refer to the type plate for the
specification of the minimum volume flow in
dependence on the negative pressure.
The appliance has an innovative filter
cleaning system that is particularly effective
with fine dust. The flat pleated filter is auto-
matically cleaned every 15 seconds
through an air jet (pulsating sound).
Note:
Automatic filter dedusting is switched
on at the factory.
Note:
The automatic filter dedusting func-
tion can only be switched on/ off when the
appliance is switched on.
–
To switch off automatic filter cleaning:
Activate the switch. Indicator lamp in
the switch goes off.
–
To switch on automatic filter cleaning:
Press the switch again. Indicator lamp
in the switch glows green.
Switch off the appliance at the main
switch.
Pull out the mains plug.
Empty the container.
Vacuum and wipe the appliance inside
and outside.
Store the suction hose and the mains
cable as shown in the illustration.
Place the appliance in a dry room and
secure it from unauthorized use.
Automatic filter cleaning
Turn off the appliance.
After each operation
Storing the Appliance
