Translation from the original operating instruction
20
AL-KO AIR HEATER / AIR COOLER INDUSTRY
Support Clamp Set X
The Support Clamp Set X is, for example, used to mount the Crossbeam Q to a steel girder (also see Chapter 5.1). The
Support Clamp Set X has an adjustment screw for continuous adjustment to different flange sizes. The cam height ad
-
justed must correspond to the thickness of the flange to be clamped (max. 30 mm).
Ceiling Support Z
The Ceiling Support Z is suitable for horizontal installation of the industrial air heaters / air coolers Industry directly below
the ceiling. The Ceiling Support Z is pre-installed on the air heater / air cooler. The distance to the ceiling is 40 mm. The
set consists of two supports and their attachment screws.
Type
A
mm
Weight kg*
Z-140-400
360
1.2
Z-650-1000
390
1.3
* Weight of one support
Ceiling Support ZZ
The Ceiling Support ZZ is suitable for horizontal installation of industrial air heaters with MLK mixed air box directly be-
low the ceiling. The Ceiling Support ZZ is pre-installed on the air heater and the MLK. The distance of the mixed air box
to the ceiling is 25 mm. The set consists of six angle irons and the fastening screws.
Type
Weight kg*
ZZ-140-1000
0.076
* Weight of one support
