AL-KO Easy Crush LH 2810, Instructions For Use Manual

Page: 21 / 220

442981_a 21
Safety instructions
Motor protection switch
The motor protection switch disconnects in the
case of overload. Hereby, switch (06/3) pops out
of the control panel. The switch can be pushed
back in again after a cooling-down phase of ap-
prox. 5 minutes, and the machine can be
switched on. If the switch does not remain by it-
self in the pressed position, extend the cooling-
down phase. If the problem continues to exist,
take the machine to a specialist workshop.
Restarting protection
For your safety, the machine is fitted with a 0
voltage switch, which automatically switches off
the machine in the case of a power interruption.
Once the voltage supply is re-established, the
machine does not restart automatically. Press the
ON switch (06/1) to restart.
Protection switch on the shredder upper
section (MH 2810)
The shredder upper section is equipped with a
protection switch, which switches off if the locking
screw (01/2) is loosened. The motor is thus pre-
vented from unintentional starting.
The machine can only be switched on again
when the shredder upper section (01/11) has
been fitted and the locking screw tightened.
2.7 Product overview (01)
MH 2810
No. Component
1 Handle
2 Locking screw
3 On-switch
4 Off-switch
5 Venting slots
6 Transport wheels
7 Base
8 Socket
9 Switch for overload protection
10 Hopper
11 Upper shredder part with feed chute
12 Grass catcher lock
13 Fangbox
14 Feet
LH 2810
No. Component
1 Handle
2 Feed chute
3 Direction of rotation selector
4 Switch for overload protection
5 Adjusting screw for counterplate
6 Socket
7 Base
8 Transport wheels
9 Feet
10 Fangbox
11 Grass catcher lock
12 Venting slots
13 Off-switch
14 On-switch
15 Hopper
3 SAFETY INSTRUCTIONS
Operator:
■
This appliance can be used
by children of 8 years and old-
er and by persons with re-
duced physical, sensory or
mental capabilities, or those
lacking experience and knowl-
edge, if they are supervised or
have been instructed with re-
gard to the safe use of the ap-
pliance and the ensuing risks.
Children must not be allowed
to play with the appliance.
Cleaning and maintenance
must not be carried out by
children without supervision.