AL-KO Classic 4.26 P-A, Operating Instructions Manual

Page: 29 / 35

G B
S ta rtin g m a n u a lly
w ithout rem ote th rottle control, w ith choke
w ith rem ote th rottle control, w ith choke
Choke
On Off
b C l
1. Set the choke at position 1 ( a 13/1).
2. Pull in the safety brake handle on the handlebar and
hold it
(Cl
17) - the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind
(Cl
18).
4. W hen the motor has warmed up (about 15-20
seconds), set the choke to position 2
(Cl
13/2).
Motor speed (rpm value) is fixed.
Motor speed cannot be adjusted.
Rem ote throttle
control with choke
 O
1. Set the throttle lever to position IM (CJ 14/1).
2. Pull in the safety brake handle on the handlebar and
hold it ( O 17) - the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind ( O 18).
4. W hen the motor has warmed up (about 15-20
seconds), set the throttle lever to a position
between 'flt5 and
O
(C l 14/2).
w ith rem ote th rottle control, w ithout prim er/choke
Remote throttle
control
Start Stop
o
w ithout rem ote th rottle control, w ith prim er ( O 16)
1. Press the primer button 3 times at intervals of about
2 seconds ( O 16). If the tem perature is below
10 °C, press the primer button 5 times.
2. Pull in the safety brake handle on the handlebar and
hold it
(Cl
17) - the brake handle does not lock.
1. Pull out the starter cord sharply, then allow it to
slowly rewind
(Cl
18).
5. Set the throttle lever to position <5? ( a 20/1).
6. Pull in the safety brake handle on the handlebar and
hold it ( a 17) - the brake handle does not lock.
7. Pull out the starter cord sharply, then allow it to
slowly rewind ( a 18).
8. W hen the motor has warmed up (about 15-20
seconds), set the throttle lever to a position
between
^
and O ( O 20).
Motor speed (rpm value) is fixed.
Motor speed cannot be adjusted.
w ithout rem ote th rottle control, w ithout prim er/
choke
2. Pull in the safety brake handle on the handlebar and
hold it
(Cl
17) - the brake handle does not lock.
3. Pull out the starter cord sharply, then allow it to
slowly rewind
(Cl
18).
Motor speed (rpm value) is fixed.
Motor speed cannot be adjusted.
470 5 9 1_c 29