AL-KO 113601, Manual

Page: 48 / 228

GB
48 LSV 6, LSV 7, LSV 8
Help in case of malfunction
13 HELP IN CASE OF MALFUNCTION
In the event of malfunctions, switch off the log splitter immediately and remove the mains plug!
CAUTION!
Risk of injury
Sharp-edged and moving appliance parts can lead to injury.
■
Always wear protective gloves during maintenance, care
and cleaning work.
Malfunction Cause Remedy
Motor does not start. Motor protection switch has
tripped. Wait until the motor has cooled
down.
Mains plug or plug socket defec-
tive Have inspected and replaced, if
necessary, by a qualified electri-
cian.
Defective mains cable Have inspected and replaced, if
necessary, by a qualified electri-
cian.
Defective motor Have inspected and replaced, if
necessary, by a qualified electri-
cian.
Green ON button does not latch
when pressed in No PE conductor or a phase not
connected. Have inspected and replaced, if
necessary, by a qualified electri-
cian.
Defective switch
Splitting wedge does not move
up/down, but motor is running. Insufficient hydraulic oil Top up hydraulic oil.
Defective hydraulic pump Have replaced by a specialist
company or AL-KO service centre.
Valve not open caused by loose
connection. Tighten loose parts.
Operating lever or connecting
parts bent Have bent parts repaired.
For LSV 8: Wrong direction of
rotation of the motor caused by
incorrect phase connection of
the mains voltage Reverse the phases of the
mains voltage at the plug socket
of the log splitter.
Have inspected and corrected, if
necessary, by a qualified electri-
cian.
Splitting wedge has no force. Insufficient hydraulic oil Top up hydraulic oil.
Bent actuating lever Have replaced by a specialist
company or AL-KO service centre.
Unusual noises and vibrations Insufficient hydraulic oil Top up hydraulic oil.