General:
01905 823 298
|
www.akw-ltd.co.uk
8
8
fI
xI
ng
P
UMP
T
o
S
UR
fa
C
e
fixing Pump to Surface
Remove front cover with a Phillips
no.2 screwdriver.
Disconnect pump motor cable.
Remove pump assembly from the back
plate to access the fixing holes.
fit to a finished surface. Pipe connections
must be easily accessible and a clearance
of 100mm around the base and sides is
recommended. Using the back plate as a
template mark the fixing holes. Drill and
plug the wall taking care there are no hidden
cables or pipes. Use all the screw fixing
positions.
Mount the pump to the finished surface using
all the wall fixings. Use the Pump Spacers to
prevent the cables being trapped. See fitting
Pump Spacers.
1
2
3
4
