Akuvox R15P, User Manual

Page: 37 / 64

37
Note : LLDP stands for Link Layer Discovery Protocol, it’s
used to exchange device information between any two
directly-connected devices. LLDP is often used to
configure Voice Vlan automatically for IP phone.
Local RTP
To display and configure Local RTP settings.

Max RTP Port: Determine the maximum port that
RTP stream can use.

Min RTP Port: Determine the minimum port that
RTP stream can use.
SNMP To display and configure SNMP settings.

Active: To enable or disable SNMP feature.

Port: To configure SNMP server’s port.

Trusted IP: To configure allowed SNMP server
address, it could be an IP address or any valid URL
domain name.
Note
: SNMP (Simple Network Management Protocols) is
Internet-standard protocol for managing devices on IP
networks.
VLAN To display and configure VLAN settings.

LAN Port/PC Port: You can configure VLAN setting
for both ports respectively.

Active: To enable or disable VLAN feature for
designated port.

Vid: To configure VLAN id for designated port.

Priority: To select VLAN priority for designated port.
Note : Please consult your administrator for specific
VLAN settings in your networking environment.
QoS To display and configure QoS settings.

SIP QoS: To configure QoS value for all SIP message.

Voice QoS: To configure QoS value for all audio
stream(RTP streams).
TR069 To display and configure TR069 settings.

Active: To enable or disable TR069 feature.

Version: To select supported TR069 version (version
1.0 or 1.1).

ACS/CPE: ACS is short for Auto configuration servers
as server side, CPE is short for Customer-premise
equipment as client side devices.

URL: To configure URL address for ACS or CPE.

User name: To configure username for ACS or CPE.

Password: To configure Password for ACS or CPE.

Periodic Inform: To enable periodically inform.

Periodic Interval: To configure interval for periodic
inform.