-6-
3.8 Manual tuning
As well as an auto tune function, you can manually tune the receiver. This can help you when aligning your
aerial or when adding stations that were missed while auto tuning.
Press and hold the "Select " key for approximately 2 seconds, the LCD display will now show "Manual tuning ".
Now use the "Up " & "Down " keys to move through the DAB channels, which are numbered from 5A to 13F.
When the receiver locates an ensemble/multiplex on one of the DAB channels, it will display this on the
bottom line of the LCD.
Now press the "Select " key to enter the current ensemble/multiplex, the top line will now display the first
station in the ensemble/multiplex.
To see what stations are present on the found ensemble/multiplex, just press either the "Up " & "Down " key.
When you've located a station that you would like to listen to, just press the "Select " key.
Once you have reached the last station in the found ensemble, it will revert back to the first station again. If
you wish to exit the manual tuning mode press the "Select " key.
4.1 Switching from DAB to FM
In order to switch the radio from DAB to FM mode, you need to press the " DAB/FM " key once. The display
will show "Switching to FM ", the radio will then automatically tune to the nearest station.
On the top line of the display is the current station name or frequency if the RDS (radio data system) is not
available. On the bottom of the display, it will show the <RDS> information
or letter only if the RDS is not available.
DAB CHANNELS
5A
5B
13F
4. FM mode
Switching to FM
98.80MHz
FM
15:30
15-02-2007
15:30
15-02-2007
<Program type>
