![background image](http://html1.mh-extra.com/html/akura/avx665/avx665_user-manual_2887180009.webp)
English
- 8 -
Digital Audio
(Optical
Connection).
(not supplied)
Connect to a
suitable Audio
Amplifier
Ethernet
Connection.
This connection is
used ONLY for
Service Technician
Upgrade use.
DO NOT
CONNECT TO
ANY ETHERNET
CONNECTION
TV Loop
Through.
Connect to
Aerial input of
TV, Female to
Male lead.
(not supplied)
After plugging the Mains Adaptor and connecting to the Mains supply, a Red light will be seen on the front
panel (Standby Mode).
Wait a few moments (60 seconds) while the box is initialised.
Press the Standby” button on the Remote control or the STB. The Red light will change to Blue and the LED
Display will be shown on the STB. (Power On mode).
Power On - Off
Power Saving
Due to new EC Power Saving Regulations this STB will switch to Power Saving Mode (Standby) if NO button
on either the Remote Control or the Manual buttons are used after 3 hours.
If you have set a Recorder to record using a Timer on the recorder and the STB as the signal source, please
be advised that the STB will switch to standby after 3 hours of “inactivity” and the recording may not occur.
To turn this feature “OFF” enter the “SETUP” menu and Select “Con
fi
guration”. Select “AUTO SLEEP” and
with the
►
button set to “OFF”. The STB will not now go to Standby after 3 Hours.