background image

 English   

- 18 -

General Characteristics

Supply Voltage for set-top box:  

12 V DC

Supply Voltage for DC Adaptor :  

220 - 240 V AC ~ 50Hz

Input Frequency  

 

 

470Mhz-862Mhz

Maximum Power consumption  

15 W

Typical  Power consumption      

 8 W 

Standby Low Power Consumption 

<1 W

USB (optional)  Current Limit   

500mA

Operating temperature 

  

5ºC to +40ºC

Storage temperature 

 

-20ºC  to  +70ºC

Humidity   

 

 

25 to 75 % rel    

Physical dimensions 

 

295 x 170 x 40 mm

Weight 

   900 

g

Hardware Con

fi

 guration

Main Processor 

 

 

MPEG Decoder NEC EMMA3SL/HD

Flash Memory 

 

 

8MB NOR BGA

DDRRAM  

 

 

2x128MB DDR2(HD Decoding for HD Mpeg4 Receiver)

Digital Capabilities 

Transmission Standards:

    DVB-T, MPEG2 MPEG4

 

 

               DVB-T2, MPEG4

Demodulation: 

• Combined DVB-T2, DVB-T demodulator that conforms to the ETSI EN 302-755 
  (second generation Terrestrial) and ETSI EN 300-744 (Terrestrial) standards.
• Symbol rate: COFDM with 2k, 4k, 8k, 16k, 32k FFT mode
• Modulation: 16QAM, 64QAM, 256QAM FEC for all DVB modes (automatically found)

VIDEO

 

• H.264 (MPEG-4 part 10) main and high pro

fi

 le level 4.1/MPEG-2 MP@HL video decoder.

• HD display multi format capable (1080p, 1080i, 720p, 576p) 
• Analogue SD output: RGB and CVBS 

AUDIO

 

• MPEG-1 layer I/II, MPEG-2 layer II, MPEG-2 AAC, MPEG-4 AAC  
• Sampling frequencies supported are 32, 44.1 & 48 kHz 

Remote Control

Operating Distance         

10 m Max.

Batteries            

 

2x1.5V Micro (R-03/AAA)

Tuners 

1 xRF In   

 

 

IEC-type, female (75Ohm)

1 x RF Out (loop through) 

 

IEC-type, male (75Ohm)

Front Panel 

Display :  7 segment  led display
Remote Control Keys 

Standby, PR+ / PR-

Summary of Contents for AVX665





















Reviews: