English
- 16 -
• In both manual and auto search, any existing channel
in the database is not re-stored to avoid duplicates of
that channel.
First Time Installation
• If you want to load default settings of your set-top-
box, you can perform
fi
rst time installation.
• Select
First Time Installation
by using “ ” or “ ”
button and press
OK
button.
• The following message, asking you whether or not to
delete all channels and settings, will be displayed.
• Highlight
No
by using “ ” or “ ” button to cancel
installation.
• Highlight
Yes
by using “ ” or “ ” button and press
OK
button
to start
fi
rst time installation.
• After you select
Yes
, factory settings will be loaded.
• Installation wizard will guide you through the
installation process. See the section, “
First
Time Installation
” in previous chapters for more
information on this process.
OSD
Warning Messages
• Some warning messages may appear on the screen
indicating that a related function may not be working
properly.
No Signal
• When the box receives no signal (e.g. the antenna
cable is disconnected), “
NO SIGNAL
” message will
be displayed on the screen.
No Channels Have Been Added Yet
• When there are no channels stored in the box,
Channel List menu will not be displayed and channel
navigation will not be available.
• In such cases, the following error message will be
displayed.
Displaying Text
• Many digital terrestrial television channels broadcast
pages of information on the programmes, the weather,
news and other topics.
• This digital teletext can be displayed by your set-
top-box. Indeed, some channels broadcast teletext
information entirely.
• When such a channel is selected, it will usually display
the opening page of information automatically, after a
short break, .
• Some channels mostly have digital teletext pages
broadcast along with the television programme.
• Press
TEXT
button to activate digital teletext pages
(if available).
• You can move through the information channels by
using navigation (“ ”/“ ”/“ ”/“ ”),
OK
and coloured
buttons.
• Press
TEXT
button again to exit teletext mode.
