Akura ASW8411-250, User Manual

Page: 15 / 39

13
Press
SETUP on the remote control to enter the
SETUP MENU
Use the
CURSOR buttons to select
ANALOG AUDIO OUTPUT
and press
The DVD recorder is defaulted to
2CH
(Normal Stereo) to set for Surround Sound select
5.1
and press
Depending upon your type of AV amplifier you will need to select the type of output from
Use the CURSOR
buttons to select SPDIF Output and press
. There are two
LCPM and RAW
. If your AV amplifier has a built in decoder select
RAW
if it has no built in decoder select
LCPM.
If LCPM is selected you may select two different “BIT” rates 48K bits /sec and 96 K
You will need to check the specification of your AV amplifier to select the correct level.
4.6 TV Channel Setup.
Before you search and store TV channels on this appliance, ensure that a good aerial system is connected.
remember the quality of the signal affects the quality of recordings.
AUTOSEARCH
Press the SETUP button to enter the SETUP MENU
Use the CURSOR buttons to select RECORDING menu and press
Use the CURSOR buttons to select COUNTRY SELECTION and press
Use the CURSOR buttons to select the correct country ( United Kingdom ) is default
Use the CURSOR buttons to select AUTO SCAN CHANNEL and press
A message will ask you if you wish to continue, use the buttons to select OK or
CANCEL
.
A Message SCAN CHANNELS will display “ Default TV System ”. It will display “ PAL “I”
by default, select continue and press
A display will show how many channels are found. Leave this to complete. If you wish
to
STOP
the search.
.
When search is complete the recorder should display BBC1, BBC2, ITV, CH4 and CH5
not the case, exit the AutoScan menu and enter the
MODIFY CHANNEL menu.
MODIFY CHANNEL
Exit all menu’s and select the programme you wish to edit ( P002 )
Press the SETUP button to enter the SETUP menu
Use the CURSOR buttons to select RECORDING menu and press
Use the CURSOR buttons to select MODIFY CHANNEL and press
Use the CURSOR buttons to select CHANNEL and press
The first item to be selected is
“C
”, this denotes an “
Off air
” channel , “
S
”
denotes a “ Cable channel ”
Use the buttons to select the first Digit. To change the value use the buttons.
second digit repeat. Press and the Recorder will switch to the
If more than one channel is incorrectly numbered you will have to repeat from the start,
until the stations are in the correct locations.
the DVD recorder.
options
,
bits /sec.
Please
and press
and press
to discontinue press
in that order. If this is
To change the
channel number you selected.
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
SELECT
4.5.Setting the Digital Audio Output
You can use this setting to modify the digital audio output to the AV receiver depending on whether
it includes its own digital multi-channel sound decoder.