18
17
Note :- When the source is DV, the recording will not be in Time Shift mode, press the DV button on
the remote control to select DV input mode.
You can use
SETUP
to Erase the
HDD
contents. Enter the
SETUP
menu and Use the cursor buttons
to select
TIMESHIFT
. Press
and use the
buttons to select
EMPTY HARD DISC
. Press
, you will be asked to confirm your selection or
CANCEL
. Select which you require.
ALL DATA WILL BE LOST.
6.2 Recording to DVD.
This DVD recorder can record from different sources such as :-TV, Internal HDD and other external
media. Load a recordable disc (DVD+R, DVD+RW, DVD-R and DVD-RW) and press
REC
(OTR),
it starts recording and both source and recording media will be shown on the Tv screen, it also
Note. When OTR is in progress on a DVD disc, you cannot record to HDD simultaneously . Once
a DVD recording is halted you need to press HDD (or go to TV/Video mode to restart time shifting).
In OTR mode you can select the length of recording by pressing the
REC
button, each press adds
30 minutes to the recording time. The maximum recording time depends upon recording quality
e.g. a 4.7GB DVD R/RW disc can record up to 6 Hrs if
SLP
(Super Long Play) is selected.
The higher recording quality selected, the shorter the recording time. Both the elapsed time and
total recording times will be displayed on the Tv screen.
To Pause the recording, press
PAUSE
on the remote control or DVD Front Control panel. Press
PAUSE
again or
REC
to resume recording.
Recording will continue until
STOP
is pressed on either the remote control or the
indicates a recording is taking place.
DVD Front Control panel
SELECT
SELECT
Time shifting buffer when it is about to be overwritten by Live recording. DVD Recorder will carry our save
immediately if the system is powered down, or if the buffer is about to be flushed.
While in Time shifting mode, you can use the following keys for other operations:
Key
Result
Note
HDD
DVD
Eject Key
Power Key
Setup
Timer
Source
P/N
I/P
HDD title list
Play disc
Open/close the tray
Power off
Bring up Setup menu
Bring up Timer menu
Change the video source
Change video output
standard to PAL/NTSC
to
Change the video output
mode to
Interlaced/Progressive Scan
(recording continues)
(recording continues unless if you
to record to DVD)
(recording continues)
(recording continues)
(recording continues)
want
:(option:
,HDD,SPACE MANAGEMENT,AUTOMATIC)
if the
is not pressed
and the recording takes all the available space on the hard disk drive, the DVD Recorder overwrites
un-protected titiles in the FIFO(First In First Out)scheme This rule will not affect titles that are selected to
be copied to DVD, the selected titiles will be kept until copying operation is over If despite this procedure,
there is no space on the HDD to record, the DVD Recorder will provide the same message as if it was in
mode(see next)
ACE MANAGEMENT, MANUAL.)
STOP
STOP
not pressed and
the recording takes all the available space on the hard disk drive, the DVD Recorder will stop recording
and prompt the user to erase some titles and create more room in the HDD.
, HDD, SP
is
NOTE
NOTE
MANUAL
SETUP
:(option:
SETUP
If the
Summary of Contents for ASW8411-250
Page 7: ...5...
Page 39: ...74 G070114A AR...