![background image](http://html1.mh-extra.com/html/akura/aptcdc832pr/aptcdc832pr_instruction-manual_2887152008.webp)
Page 6
RADIO OPERATION
AUTOMATIC TUNING
MANUAL TUNING
This is for selecting stations, which cannot be tuned automatically. (manual selection)
To tune a channel manually.
- Skip step 4 in the above procedures.
- In step 3, each time the “SKIP +” or “SKIP -” button is pressed momentarily (0.5 second or less),
the frequency changes by a fixed step:
FM: 0.05 MHz steps
AM: 9 kHz steps
1. Press the “TUNER / BAND” button to enter radio mode.
2. Press the “TUNER / BAND” button to select AM or FM.
3. Press the “SKIP +” or “SKIP -” button to start automatic tuning process.
4. When a station is tuned in, the tuning process will stop automatically and you can listen to your
chosen station.
MEMORY PRESET
1. Repeat step 1 to 4 in the AUTOMATIC TUNING procedures.
2. When you have a station you wish to store. Press the “MEMORY” button to start the preset process.
3. Display will show the memory sequence number and a flashing “00”.
4. Press the “M - UP” or “M - DOWN” button to select the preset station number.
5. Press again the “MEMORY” button to store your chosen station.
6. Once all the stations are stored, press the “M - UP” or “M - DOWN” button to listen to
your chosen station.
MONO / STEREO
If the station received is noise free select Stereo. If the station is poor or noisy select Mono.