![background image](http://html1.mh-extra.com/html/akura/aptcdc832pr/aptcdc832pr_instruction-manual_2887152014.webp)
Page 12
OTHER FEATURES
TIMER ON / OFF & MEMORY CLOCK AJDUST BY REMOTE CONTROL
1. Press the “MODE” button once, the display will show the clock time. Then press the “MEMORY /
CLK - ADJ” button. The display will show “00:00”. Press the “SKIP+” or “SKIP-” button to adjust the
time. When done, press the “MODE” button once to confirm.
2. Now “TIMER ON” will appear flashing on the diaplay. Press the “MEMORY / CLK - ADJ” button and
“SKIP -” button to set the TIMER ON function. When done, press the “MODE” button once to confirm.
Set the appliance to “STANDBY” mode.
3. Press the “MODE” button once more, “TIMER OFF” will appear flashing on display. Follow similar
instructions as mentioned in 2) above. Unit will turn to “STANDBY” mode, at the time set by TIMER
OFF.
4. After setting the TIMER ON and TIMER OFF, press the “TIMER” button once to activate these
functions.
SLEEP
1. Press the “SLEEP” button on remote control, display will show “SLEEP 90”. That means, after 90
minutes, appliance will automatically turn to standby mode.
2. Hold the “SLEEP” button for about 5 seconds to select the turn off time, from 90, to 10 minutes
in 10 minute intervals.
3. Press the “SLEEP” button to “SLEEP OFF” to canel the sleep function.
Note. If the apparatus is disconnected from the mains supply all timings will be lost
ON HANDLING DISCS
ON CLEANING DISCS
Do not touch the playback side of the disc.
Do not attach paper or tape to disc.
Fingerprints and dust on the disc casue picture
and sound deterioration. Wipe the disc from the
centre outwards with a soft cloth. Always keep
the disc clean.
If you can not wipe off the dust with a soft cloth,
wipe the disc lightly with a slightly moistened soft
cloth and finish with a dry cloth.
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or anti-
static spray for vinyl Lps. It may damage the disc.