6
Installing the Batteries.
Remove the battery cover from the remote control and place 2 x AAA batteries (Not supplied)
inside the battery compartment, taking note of battery polarity,
see diagram inside battery
compartment. Replace battery cover firmly.
Using the Remote Control.
Point the Remote Control towards the front of the PVR. Do not press more than one button at
a time. The working range is approx 7 metres and +/-
30 degrees.
Do not place any objects in the signal path.
Bright sunlight or fluorescent lights may decrease the operating
sensitivity.
Battery Disposal.
Do not break open or throw on a fire exhausted batteries.
If batteries “leak”
remove immediately, clean out any residue
with warm soapy water, do NOT allow water to enter the main
body of the Remote Control, dry thoroughly before fitting new
batteries.
Do not throw old batteries in the domestic waste. Contact your
local waste authority for disposal instructions
