![background image](http://html.mh-extra.com/html/akura/amtdt3509-250/amtdt3509-250_user-manual_2887242016.webp)
15
DTR Setting (Fig 12).
You can modify the “Time Shift”
duration, Format the Hard disc, Check the hard disc information
and set
the Auto Discard mode.
Time Shift Duration
.
You may set the “Time Shift Duration”
to the options 30 / 60 / 90 / 120 minutes
Format Hard Disc.
If you replace the Hard Disc, it will be necessary to Format the
disc. It may arise that you need to erase
the disc. Formatting the HDD will ERASE ALL programme information.
HDD Information
.
Displays the amount of disc space used and available.
Auto Discard Setting. (Fig 13).
When the HDD is full, erase the existing recordings as to their type, the choices are :-
Oldest, Shortest, Biggest. Select “Excluded”
to remove un viewed recordings, otherwise chose
“Included”.
OSD Setting.
You may set the OSD time “On”. You can set 5, 10, 15 and 20 seconds. After the set time the OSD will
turn Off.
Timers.
Follow the steps below to activate the Timer menu.
Press the “MENU”
button to display the Main menu (Fig 4)
Press the “UP”
or “DOWN”
(
▲
/
▼
) cursor buttons to select Timers
Press “OK”
to enter the Timers menu.( Fig14)
( When a start time is reached, the PVR starts to record or view
the required programme, when the “end
time”
is reached the recording will stop. You may filter the timers with the RED button and delete with
the “OK”
button.
Fig 12
Fig 13
Fig 14