![background image](http://html1.mh-extra.com/html/akura/acltdvd1921w/acltdvd1921w_instruction-manual_2887197005.webp)
- 7 -
5- Remote Control Overview
Remote control Illustration Keys description on the remote control
- 8 -
6- Connection between different input signals
A) Connect with PC signal
You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not
supplied).
1. VGA input (Remember to tighten the screws.)
2. PC
Audio
Input
Connection steps
˖
z
Read the user guide supplied with your computer and ensure that it has a VGA connector;
z
Make sure that the power of the LCD-TV and the PC are off;
z
Connect a D type 15-pin VGA interface cable (not supplied) to the VGA video interface connector
on the PC. Then connect the other end to the VGA video interface connector on the back of the
LCD-TV. Tighten the screws on the VGA connectors once they are firmly connected;
z
Turn on the power of the LCD-TV first, and then turn on the power of the PC;
z
Press the TV/AV button to set the video input mode of the LCD-TV to “PC”;
z
Our LCD-TV can support the resolutions list in table 2. If the resolution you want is not listed, the
LCD-TV may not display the image properly,
z
Use the VOL- / VOL+ on the control panel or remote controller to adjust the volume.
Table 2
Resolution 640x480
800x600
1024x768
720x400
Horizontal frequency
ΰ
KHz
α
20-55 20-55 20-70 31.47
Vertical frequency
ΰ
Hz
α
60-85 60-85 60-75
70
Clock
ΰ
MHz
α
32.5-60 32.5-60 25-80
28.322
B) Connect to external AV devices using Composite and S-VIDEO inputs
1. DC
input.
2. Left & Right Audio input.
POWER
MUTE
AUTO
P.MODE A.MODE DISPLAY NICAM
LCD
MENU
DVD
MENU
INPUT
ENTER
CH-
CH+
VOL-
VOL+
SIZE
SUBPAGE REVEAL
ZOOM
PROG
DVD
STEUP
ANGLE
INTRO
REPEAT
A-B
MIX
GOTO
SUB-T
SLOW
STEP
TITLE
AUDIO
:
9
8
7
;
/
4
3. VIDEO input
4. S-VIDEO input
POWER
POWER
Switch on LCD TV when at standby mode
MUTE
MUTE
Press to mute the sound. Press again or press VOL+ to unmute.
NUMBER BUTTONS
NUMBER BUTTONS
Press 0-9 to select a TV channel directly when you are watching TV. The channel changes
after 2 seconds. To enter page number in teletext mode and
P.MODE
Press repeatedly to cycle through the available video picture modes:
STANDARD
A.MODE
Press to cycle through the different sound settings:
-/--
Press this button to enter a program number for multiple program channel such as 2-1,etc.
Returns to the previously viewed programme.
Press to select the NICAM modes.
MILD
THUMBSTICK( / / / / ENTER )
THUMBSTICK( / / / / ENTER )
Allows you to navigate the on-screen menus and adjust the system settings to your
preference.
LCD MENU
LCD MENU
Brings up the LCD main menu to the screen in analogue TV mode.
DVD MENU
DVD MENU
Brings up the DVD main menu to the screen in
mode.
INPUT
INPUT
Press to cycle through the input source in following:
TV
SCART
DISPLAY
DISPLAY
Press to display the source and channel’s information.
CH+/-
CH+/-
Press to scan through or to select a channel.
VOL+/-
VOL+/-
Press to increase / decrease the sound level.
DVD
INDEX
INDEX/
Request the index page.
SIZE
SIZE/
Change display size in teletext mode.
Reveal or hidden the hidden words.
SUBPAGE/ANGLE
Sub coded page access..
To switch the
at the bottom of the screen.
TITLE
TITLE
TEXT/BACKWARD
TEXT/BACKWARD
Switch On or Off the teletext mode.
AUTO/OPEN
AUTO/OPEN
Press to do auto configuration directly
SLEEP
SLEEP
dialogue
Hold On or Off for current page display
PLAY/PAUSE
PLAY/PAUSE
Press to play or pause the DVD playing.
STOP/MIX
STOP/MIX
Press to stop the DVD playing.
SLOW/STEP
SLOW/STEP
Press to slow / step the speed of DVD playing.
To display the setup menu of DVD on the screen.
PROGRAM
PROGRAM
To select the DVD program playback.
REPEAT
REPEAT
Repeat playback .
AB
AB
Press to AB playback.
PERSONAL
FRESH
MUSIC
PERSONAL
THEATRE
VOICE
select the chapter in DVD.
DVD
SUB-T
SUB-T
Select the caption in DVD mode.
/Open the DVD door.
/DVD playing backward fast.
/Playing forward fast.
/DVD angle switch button
REVEAL/ZOOM
/DVD zoom button
/DVD skip backward button.
/DVD skip forward button.
EXIT
Exit menu mode.
NICAM/AUDIO
/Change audio mode:left-right-mono-stereo.
z
press the AUTO button to automatically adjust the picture.
TEXT
HOLD INDEX
SLEEP
EXIT
HOLD/FORWARD
DVD SETUP
GOTO
INTRO
Lets you select amount of time before your TV turn itself
off
Time/chapter play back button.
INTRO menu mode.
AV
S-VIDEO
PC-RGB
PC AUDIO
VGA
DC
L
VIDEO
R AUDIO
S-VIDEO
Switch to the teletext with mix mode.