3. Using the “Menu” button enter that menu and with the “ ”button move
the highlight down to “Fine Tune”.
4. Press the “Menu” button and using the “ and
” buttons, adjust the
tuning as required.
5. To exit this menu press “Exit”
Skip. (Remove)
When “Auto Search” was done, there will have been a number of “unwanted”
stations added to the memory, these could either be noisy pictures or stations
out of your area. To remove these do the following :
1. Press the “Menu” button, this will show the menu, see “fig 1”
2. Using the “
” button, move the highlight on the left side of the menu to
“Tuner”, see “fig 2”.
3. Using the “Menu” button enter that menu and with the “ ”button move
the highlight down to “Prog Edit”.
4. Press “Menu” to enter the sub menu see “fig 6”.
5. Using the “
” button, move the highlight to “Current programme”.
6. Press “Menu” to enter that selection and using the “ and
” buttons,
select the first “unwanted” station.
7. Again press “Menu” and using the “
” button, move to “Skip”.
8. Press “Menu” and then the “ and ” button to switch “On or Off”.
9. Press “Menu” to confirm the change.
10. To remove any other unwanted stations repeat 5 to
9
.
11. To exit the menu, press “Exit”, until the menu is turned Off.
Sound System
This selects the “Sound System” received in various countries. In the UK we
use “I”, Western Europe uses “B/G”, Eastern Europe uses “D/K” , USA and
Japan use “MN”.
To select the “Sound System” proceed as follows :
1. Press the “Menu” button, this will show the menu, see “fig 1”
2. Using the “
” button, move the highlight on the left side of the menu to
“Tuner”, see “fig 2”.
3. Using the “Menu” button enter that menu and with the “ ”button move
the highlight down to “Sound Sys”.
15
