Power Supply
Operating Mode
Indicator Colour
State
Power off
Off
Off
No signal/standby
Red light
On
Normal operation
Green light
On
How to Connect/Disconnect the Power Supply
1. Insert the plug of the12V DC power supply into the 12V input socket of
the TV set.
2. To turn the Tv on press the ON/OFF button on the Tv or the Remote
control.
3. To turn the TV set off temporarily, “standby”, press the ON/OFF button on
the remote control or ON/OFF button on the TV set.
4. To cut off the power completely, pull the Mains power plug out, this discon
-
nects the AC/DC adaptor.
Power Indicators
Automatic Standby
In VGA mode, the Tv will switch to Standby if it receives no signal after 15
seconds. If you switch to TV mode the Tv will operate normally.
8