Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
6.2.
Determination of a start time:
When the air conditioner is switched off, press the TIMER button to select the desired start time. (A value between
1 - 24 hours can be selected). After this selected time has elapsed, the unit switches on automatically (with the last
used settings).
7. Activation of night mode (low-noise operation)
Press the SLEEP button and the silent night mode is activated.
The activated night mode automatically increases the target temperature by 1°C in the first hour. In the second
hour, the target temperature is automatically increased by another 1 °C. After that, the target temperature is kept at
this level.
Furthermore, the night mode always uses the weak operating strength (L).
Pressing the SLEEP key again cancels the silent night mode and reactivates the last selected settings.
Note: After 12 hours of operation in night mode, the air conditioner switches off automatically. In addition, night
mode cannot be activated in the following operating modes: Automatic mode, Fan mode or Dehumidification mode.
8. Remote control
All functions and settings as described in points 1 - 7 above can also be
operated/adjusted with the remote control supplied.
The remote control requires two AAA batteries (not included).
9. Error display
The air conditioner detects malfunctions and displays them in the unit's display panel.
If the display field shows "E1", "E3" or "E5", please contact your dealer.
10. Turbo cooling (increase in cooling capacity)
The air conditioner is equipped with a "turbo cooling function". This increase in cooling capacity can be achieved by
filling the side water tank of your air conditioner with water once. This provides an additional cooling boost and an
increase in performance without further energy expenditure !
See the following graphics for this:
11. Other operating instructions
11.1. To ensure a long service life of the compressor, please do not switch the unit off and on again within 3
minutes (switching the unit off and then on again shortly afterwards will damage the compressor).
11.2.
The cooling circuit (compressor) switches off as soon as the ambient air is below the target temperature.
However, the air circulation continues. If the ambient air rises above the target temperature, the cooling
circuit (compressor) also switches on again automatically.
