background image

 

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany 

www.AKTOBIS.de

 

Email: [email protected] 

 
 
 
 
As with all building dryers, the dehumidification performance is decisively influenced by the following factors: 
A) Humidity content of the room air and B) Heat/temperature in the room.  
For safety's sake, here is an approximate dehumidification table for DURABLE OPERATION:  

 

30 degrees 

and 80% r.h. = approx. 50 litres 

 

and at 60% r.h. = approx. 25 litres 

20 degrees 

and 80% r.h. = approx. 25 litres 

 

and at 60% r.h. = approx. 14 litres 

15 degrees 

and 80% r.h. = approx. 18 litres 

 

and at 60% r.h. = approx. 10 litres 

10 degrees 

and 80% r.h. = approx. 10 litres 

 

and at 60% r.h. = approx.   7 litres 

 

All figures are approximate per day (fluctuation tolerance) when measured directly at the unit inlet and of course 
these values only apply if the temperature and moisture content remain constant! 
 
 

Other 

 
Warranty statement: 

 
Notwithstanding the statutory warranty claims, the manufacturer grants a warranty in accordance with the laws of 
your country, but at least 1 year (in Germany 2 years for private individuals). The warranty begins on the date of 
sale of the appliance to the end user. 
The warranty only covers defects that are due to material or manufacturing faults. 
are. 
Warranty repairs may only be carried out by an authorised customer service. To 
To make your warranty claim, please enclose the original sales receipt (with date of sale). 
Excluded from the guarantee are: 

Normal wear 

Improper applications, such as overloading the appliance or non-approved accessories. 

Damage due to external influences, use of force or foreign objects 

Damage caused by non-observance of the operating instructions, e.g. connection to an incorrect mains voltage 
or non-observance of the assembly instructions. 

Completely or partially dismantled units 

 

Conformity: 
 

The construction dryer has been tested and itself and/or parts thereof have been manufactured under the following 
(safety) standards: 

CE (EMC + LVD) conformity, of course. 
 

CE conformity tested according to:  

EN 55014-1:2017, EN 55014-2:2015 
EN 61000-3-2:2014, EN 61000-3-3:2013 
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019 
EN 60335-2-40:2003+A11:2014+A12:2005+A1:2006+A2:2009+A13:2012 
EN 62233:2008 

 

Correct disposal of this product: 

 

Within the EU, this symbol indicates that this product should not be disposed of with household waste. 
Old appliances contain valuable recyclable materials that should be recycled. In addition, the 
environment or human health should not be harmed by uncontrolled waste disposal. Therefore, 
please dispose of old appliances via suitable collection systems or send the appliance for disposal to 
the place where you bought it. They will then recycle the appliance. 

 

 
 

We hope you enjoy using this device.................. 

 
 

Summary of Contents for WDH-500AH











Reviews: