Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Notes: In the case of hard water (the tap water contains too much calcium and
magnesium), limescale deposits can occur in the aroma diffuser and especially in the
area of the water vapour unit and these can lead to impairment of the functioning. We
therefore recommend that you use
Clean the ultrasonic water vapour unit every week.
Change the water in the aroma tank regularly to keep it fresh.
Clean the evaporator as follows:
a.) Add 5-10 drops of a suitable cleaning agent (e.g. Dimanin A*
available at any
pharmacy*
) to the surface of the vaporiser or also to the rest of the lower area of
the aroma tank and wait a few minutes.
b.) Then carefully wipe off any flakes of dirt (limescale) from the surfaces with a soft
sponge.
Note: Never clean the vaporiser with objects made of metal or blunt material !
This would damage the evaporator.
c.) Finally, rinse the vaporiser / aroma tank well with clear water.
3.3 Storage
Remove all water, clean the appliance thoroughly and dry it well if you are not going to
use the aroma diffuser for a long time. (Let the appliance dry out completely and
please remove all water and oil residues).
We recommend that you store the dried out and cleaned unit in the original box when
not in use.
Technical data
Model name:
WDH-AD31
Voltage:
100 ~ 240V / 50 ~ 60Hz
Max. Power consumption:
12 W / 24 V
Aroma output:
10 - 30 ml/h
Aroma tank capacity:
Approx. 300 ml
Electrical protection class:
III
Dimension (H/W/D):
240 x 158 x 158 mm
Weight:
0,5 kg
For the technical data, deviations are reserved !!!
