Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
Email: [email protected]
Instructions for use
1. Before use
Carefully remove the Aroma Diffuser from its packaging box and remove all protective
packaging. Place the Aroma Diffuser on a firm, level surface that provides sufficient
space for the appliance and the user.
2. Commissioning
2.1 Open the lid of your Aroma Diffuser and fill the Aroma Tank with
clean, clear water. Then add a few drops of your desired flavouring.
We recommend a maximum of 0.1 ml - 0.15 ml aroma oil per 100 ml water in the
aroma tank !
In addition, we recommend that you always use only 100% essential oil !
Notes:
Always use only water with a temperature below 40°C !
Always use boiled and then cooled water. Distilled water is also excellent for
preventing calcification of your appliance.
avoid !
Only fill the aroma tank to the specified maximum quantity (300 ml) using the
measuring cup provided !
2.2. First connect the mains plug to the unit and then plug the mains plug into a socket.
Switch on the appliance by pressing the MIST button. The unit starts with a high
aroma output (30 ml/h). You can also activate a lower aroma output (20 ml/h) by
pressing the HIGH/LOW button. Then use the MIST button to set the desired
operating time.
Press the MIST button 1x:
=
Unit operates for 60 minutes
Press the MIST button twice:
=
Unit operates for 120 minutes
Press the MIST button 3 times: =
Unit operates for 180 minutes
Press the MIST button 4x:
=
Unit operates in continuous mode (ON)*
Press the MIST button 5 times: =
Unit switches off
Hold down the MIST button:
=
Unit switches off
*The appliance operates until the water in the aroma tank is used up and then switches off
completely.
