АМM-1130
37
Chapter 4 Technological Specifications
General Features
●
Voltage between the measurement end and ground is of 1000V AC/DC. 1000V CAT II, 2th pollution grade.
●
22000 counts, automatic/manual range, basic sampling rate 2 t/s and 46 segment analog bar.
●
When rotary switch being in the positions of mV, logic frequency, diode, resistance and capacitance, the maximum
overload protection voltage will be 250V(effective value),while in the positions of μA/mA the protection current being
0.25A,and in the position of A, the protection current being 10A.
●
Over range indication OL.
●
When the total voltage of batteries being lower than 7V, the symbol for battery display will be lighted.
●
Fuse being 0.25A/250V
，
Ø5X20
(μA/mA end) and 10A/250V Ø6.2X32 (A end).
●
Six 7# AAA batteries X 1.5V.
●
Infrared coupling USB interface.
●
Operating temperature: 0
℃
～
30
℃
(relative humidity 0
～
80%)
31
℃
～
51
℃
(relative humidity 0
～
50%)
●
Storage temperature: -20
℃
～
60
℃
(relative humidity <= 80%)
●
Altitude: operation less than 2000m,
storage less than 10000m
●
Volume
：
200mm X 100mm X 40mm
●
Weight
：
560g
Summary of Contents for ??M-1130
