АМM-1130
11
Number of Order
Symbol
Functions
1
℃
℉
Indicating the measurement unit being
℃
or
℉
of temperature
1
nμmF
Indicating the measurement unit being nF,
μF or mF of Capacitance
1
μm VA
Indicating the measurement unit being μA, mA ,A or V of current and voltage
1
MKΩHz
Indicating the measurement unit being M
Ω, kΩ and Ω of resistance or MHz,
kHz and Hz of frequency
2
Indicating it is now performing the Diode measurement
3
Indicating it is now performing the DUTY Cycle measurement
4
Indicating the display value being the maximum value(MAX),the minimum
value(MIN)
5
Indicating the meter being in the state for sending data to the USB interface
of computer
6
Indicating the measurement being relative measurement while the displayed
value being relative value
7
Indicating it is now in the data-holding state
8
Indicating AUTO POWER OFF is availably
9
Indicating it is now in the AC measurement state.
Summary of Contents for ??M-1130
