www.tmatlantic.com
- 8 -
V
、
mV
The unit of voltage: Volt, Mill volt
nF
、
µF
The unit of capacitance: Nanofarad, Microfarad, Millifarad.
°
C
、°
F
D
egrees Celsius (default) or Fahrenheit.
dBm
For ac volts functions, reading is shown in decibels of power above or below 1 mW
(dBm).
AC DC
Alternating current, direct current.
%
Display the duty cycle ratio of signals when measuring frequency.
Bar Graph
The polarity indicator both ends of the bar graph show the polarity of the input; the arrow
right of the bar graph indicates an overload condition.
41000
Range display. Digits display range in use.
○
,11
Time displays. In addition, it could be used to temperature display as well.
Unit displays.
Table 2-3. Display Unit (cont.)
NO.
Unit Meaning
○
,12
Elapsed Time Display
Secondary Display, and could be used to show the sequence number of the stored
information.
○
,13
Unit Display of the secondary display
○
,14
MEM
Readings are being recorded in manual stored mode
○
,15
Primary Display
（
3 3/4 digital
）
Continuity test function is selected.
>30 V ac and/or dc may be present at the input terminals
Relative measured value
○
,16
Diodes Test
○
,17
In Calibration mode
