275g001e_SC5010_HS_ES_3rd ed.docx
2022-01-11
Page 16 of 22
8.2.7
Trendelenburg
The Trendelenburg position is set either by pressing the individual buttons for seat backrest and leg
rest, or by pressing red outlined button. Here is the shock position already stored and can be called.
Caution:
For safety reasons and as a regulatory requirement the key need to be pressed and held while the
chair is in motion.
8.2.8
Power button
The operational readiness of the operating chair has an automatic power-saving mode. The hand
control locks itself after 2 minutes. It is switched on again automatically. As soon as an axis is
actuated, the chair is ready for use again after 0.5 seconds. There is also the option of
switching the chair off completely, for this the power button must be pressed for 2
seconds. In this state it is ensured that no motor moves even if an axis is accidentally
operated.
The background lighting of the hand control switches off automatically after 50 seconds