275g001e_SC5010_HS_ES_3rd ed.docx
2022-01-11
Page 6 of 22
5
Mounting and commissioning
The medical device is delivered completely assembled. If optional parts or accessories are part of the
delivery, please refer to the respective section in this user manual for mounting or connecting
instructions.
No additional assembly or calibration work is required to operate the medical device.
6
Electrical connections
Find the location of the power input on the device or the battery charger unit in the respective
section of this user manual. To connect the device to the power supply use only the power cable
delivered with the devices or as specified by the manufacturer.
7
Product description and controls
7.1
Battery (100-925)
Electrical power is provided by a re chargeable battery. Battery capacity will last for approximately 40
examination procedures under typical load requirements. Please also refer to chapter “Disposal of
device”. The complaint about the battery is determined on the hand control (see chapter 8.1.1)
7.2
Battery re charger unit (100-924)
Attach the re charger unit permanently to the wall using two screws or set up at a suitable place.
Make sure the unit is oriented vertical to assure the gravity-assisted contact of the electrical metal
contacts.
The re charger unit is equipped with a voltage detecting power unit approved for 110V to 230 V line
voltage. The presence of line power is indicated by a green LED.
The re charging process is indicated by a yellow LED and may take up to 4 hours. Upon completion
the yellow LED extinguishes.
Warning
Electrical
shock
The medical device is only de-energized when the mains plug has been
pulled.
Warning
Electrical
shock
Remove battery from battery holder, if the device is not used for
an extended period of time.
Re charger unit with
power cord
Control light
ON
Control light
CHARGE
Vertical orientation of re
charger unit