6
Installation
-Remove the bezels (1)
-Make a 1/4 turn of the screws (2) anti-clockwise and
open the door (3).
-Install the necessary glands (4 / 5) by drilling holes in the
points indicated on the box.
-Mark and make the holes in the wall with the aid of the
template included.
-Fix the device to the wall. If it is a brick wall, use the screws and plugs supplied; if the wall is made of sheet
metal (cold room store), use the screws provided without plugs (6).
-Wire the device by following the recommendations indicated on p. 7.
-Close the cover (3), tighten the screws (2) and replace the bezels (1).
1
2
3
6
4
Ø Max. 25 mm
5
Ø Max. 20 mm
1652H302 Ed.03
Summary of Contents for AKO-16520
Page 31: ...1652H302 Ed 03 31...
