4.- Description
Display
Browser
Light key
Defrosting in progress
Continuous cycle active
Stand-by active mode
Change of the Set Point active
Cold room light active
Alarm active
Fans active
Compressor active*
Compressor or solenoid active**
* If pump down is active, it indicates the operation of the compressor.
** If pump down is active, it indicates that the solenoid is open, otherwise it indicates that the compressor is in operation.
Safety cover
Circuit breaker
(Only
AKO-15645 /
AKO-15646
)
Defrosting thermal protector
Manoeuvring thermal protector
Escape key
4.1.- Quick access to functions
Pressing it for 5 seconds allows changing the
SET POINT temperature.
Pressing it for 5 seconds, activates or deacti-
vates the CONTINUOUS CYCLE.
Pressing it for 5 seconds, the quick setup
menu is accessed.
Pressing it for 2 seconds, activates or deacti-
vates the cold room light (if P6 or P62=1). This
function stays active although the unit is in the
m
mode.
Pressing it for 5 seconds activates or
deactivates the defrost.
If probe 1 is displayed by default, the value
of probe 2 will be displayed by pressing and
vice versa. (see parameter P8)
Pressing it for 10 seconds, the advanced setup
menu is accessed.
Silences the alarms (they are indicated on the
display).***
Pressing it for 5 seconds activates or
deactivates the Stand-By mode. The display
shows the
m
symbol in this mode.
SET
SET
SET
SET
SET
SET
ESC
¿
Temperature
Only
AKO-15648
English
*** The trapped person alarm (button AKO-520622)
cannot
be silenced.
Pushbutton
Only
AKO-15627 /
AKO-15646
18
