[AKD4629-A]
<KM101902>
2012/04
2-1. [Repeat Test]: Repeat Test Dialog
Click [Repeat Test] button in the Test tab to open the repeat test dialog shown below.
Repeat writing test can be executed by this dialog.
[Start] Button
: Starts the repeat test.
A dialog for saving a file of the test result will open when clicking this button.
Name the file.
Test
will
start
after
specifying
a
saving
file.
[Close] Button : Closes this dialog and finishes the process.
[Address] Box : Data writing address in hexadecimal numbers.
[Start Data] Box : Start data in hexadecimal numbers.
[End Data] Box : End data in hexadecimal numbers.
[Step] Box : Data write step interval.
[Repeat Count] Box : Repeat count of the test writing.
[Up and Down] Box : Data write flow is changed as below.
• Checked: Writes in step interval from the start data to the end data and turn back from the end data to
the start data.
[Example] Start Data = 00, End Data = 05, Step = 1, [ ]…for 1 count.
Data flow: [00
→
01
→
02
→
03
→
04
→
05
→
05
→
04
→
03
→
02
→
01
→
00] x Repeat Count Number
• Not checked: Writes in step interval from the start data to the end data and finishes writing.
[Example] Start Data = 00, End Data = 05, Step = 1, [ ]…for 1 count.
Data flow: [00
→
01
→
02
→
03
→
04
→
05] x Repeat Count Number
[Sampling Frequency] Box: Selects sampling frequency 44.1kHz/48kHz
[Count] Box : Indicates the count number during a repeat test.
[Lch Level] Box : Indicates the Lch Level during a repeat test.
