3
cdj-mp32
PART NAMES AND FUNCTIONS
26. REMOTE JACK
27. POWER CONNECTOR
28. DRIVE 1 DIGITAL OUT
29. DRIVE 1 AUDIO OUT R & L
30. DRIVE 2 DIGITAL OUT
31. DRIVE 2 AUDIO OUT R & L
- Connect the supplied 8 pin cable from this jack to
the remote control's connector. This will allow you to control the player
functions with the remote unit.
- This is the main power connection. Only
use the supplied polarized power cord. Use of any other power may result
in sever damage to the unit. Be sure the local power matches the unit’s
required power.
- This jack sends a digital stereo out signal.
Use this connection to create near perfect copies of your disc to a Mini
disc, CD-R, or any other recording device with a digital input.
– These jacks send a left and right
analog mono output signal. Use these jacks to send standard audio to a
mixer or receiver. The red colored jack represents the right channel output
and white jack represents the left channels output.
- This jack sends a digital stereo out signal.
Use this connection to create near perfect copies of your disc to a Mini
disc, CD-R, or any other recording device with a digital input.
- These jacks send a left and right
analog mono output signal. Use these jacks to send standard audio to a
mixer or receiver. The red colored jack represents the right channel output
and white jack represents the left channels output.
(32)-(35)Track, Minute, Second and Frame Displays
(36)BAR Indicator
(37)SINGLE Indicator
(38)TOTAL REMAIN Indicator
(39)REMAIN Indicator
(40)PITCH DISPLAY
- These displays
indicate information for the CD’s current position and time.
- These ten indicators provide a visual display of the
approximate position of the pickup within the current track.
- This indicates the unit is in single play mode,
the unit will play a single and return to CUE mode. If the single indicator
isn’t displayed the unit is in continuous mode. In continuous mode the
drive will play through all the tracks on the disc.
- This indicator is in direct reference
to the time meter. When the total remain indicator is displayed in the
LCD, the time defined will refer to a disc’s total remaining time. The time
mode is changed by tapping on time button.
- Indicates that the time shown on the display is
the remaining time of playing track.
- It shows the BPM change range, the BPM
changes within a range of +/-4%,+/- 8%,+/-16%.
MAIN UNIT
LCD DISPLAY
REAR PANEL
21. DRIVE 2 TRANSPORT TRAY
22. DRIVE 2 OPEN/CLOSE
23. DRIVE 1 TRANSPORT TRAY
24. DRIVE 1 OPEN/CLOSE
25. POWER SWITCH
- This tray is used to load and unload a
compact disc into the drive 2 mechanism. The tray is opened and closed by
pressing the DRIVE 2 OPEN/CLOSE BUTTON. Never attempt to force the
transport tray open or closed when the power is turned off.
(Transport Tray Open/Close) - This button is
used to open and close the drive 2 transport tray. NOTE: When a disc is already
loaded in the transport tray, the tray will not open unless the unit is in pause or
cue mode.
- This tray is used to load and unload a
compact disc into the drive 1 mechanism. The tray is opened and closed by
pressing the DRIVE 1 OPEN/CLOSE BUTTON. Never attempt to force the
transport tray open or closed when the power is turned off.
(Transport Tray Open/Close) –This button is
used to open and close the drive 1 transport tray. NOTE: When a disc is already
loaded in the transport tray, the tray will not open unless the unit is in pause or
cue mode.
- This switch is used to control the unit's main power.
A red LED directly above the power switch will glow to indicate main power
is active.
26
31
27
30
29 28
10
cdj-mp32
cdj-mp32
CD DISC & MP3 FORMATS
FORMATO DEL
DISCO
FORMATO MP3
MÉTODO DE
ESCRITURA DE
DISCOS
Extensiones de archivos aplicable
Formato del selector de CD-ROM
Joliet
Numero Max. de carpetas
Numero Max. de archivos
mp3 . MP3 . mP3 . Mp3
max. 63 caracteres
max. 63 caracteres
255
max. 999 archivos (* nota #1)
ISO9660
Modo-solo 1
MPEG 1
Layer 3 estándar (ISO/IEC 13818-3), lo que proporciona para una codificación similar a frecuencias de
muestreo de 16, 22.05 y 24 kHz. 32/40/48/56 /64 /80/96/112/144/160 Kbps
MPEG 2
MPEG 2.5
Sesión simple
Sesión múltiple
Disco cada vez y pista cada vez
Layer 3 estándar (ISO/IEC 11172-3), lo que proporciona para un canal ('mono') u dos canales ('stereo') codificación
a una frecuencia de muestreo de 32, 44.1 y 48kHz. 32/40/48/56/80/96/112 /128/160/ 192/224 /256/320 kbps
Layer 3 estándar (ISO/IEC 13818-3), lo que proporciona para una codificación similar a frecuencias de
muestreo de 16, 22.05 y 24 kHz. 32/40/48/56 /64 /80/96/112/144/160 Kbps
Si la primera sesión es CDDA, Solo podrá reproducir pistas CDDA.
Si la primera sesión es MP3, Solo podrá reproducir pistas MP3.
DISC FORMAT
MP3 FORMAT
DISC WRITING
METHOD
Applicable file extensions
CD-ROM sector format
Joliet
Max. number of Folders
Max. number of files
mp3 . MP3 . mP3 . Mp3
max. 63 characters
max. 63 characters
255
max. 999 files (* note #1)
mode-1 only
MPEG 1
Layer 3 standard (ISO/IEC 11172-3), which provides for single channel ('mono') and two-channel ('stereo')
coding at sampling rates of 32, 44.1 and 48kHz. 32/40/48/56/80/96/112 /128/160/ 192/224 /256/320 kbps
Layer 3 standard (ISO/IEC 13818-3), which provides for similar coding at sampling rates of 16, 22.05 and
24 kHz. 32/40/48/56 /64 /80/96/112/144/160 Kbps
MPEG 2
MPEG 2.5
Layer 3 standard, which provides for similar coding at sampling rates of 8,11.025 and 12 kHz.
32/40/48/56/64/80/96/112/144/160 Kbps
Single Session
Multi Session
Disc at Once and Track at Once
If the 1st session is CDDA, you can playback Only CDDA track.
If the 1st session is MP3, you can playback only MP3 file.
Xing/VBRI VBR
ISO9660
Xing/VBRI VBR
FORMATOS CD DISC
MP3
&
en
gl
is
h
en
gl
is
h
