akira AC-F30HG, Service Manual

Page: 24 / 36

24
Model No: AC-F30HG
Version 1.0
Connecting the pipe.
1. Remove the flare nuts of the valves.
2. Match the piping center, tighten the flare nuts with hand.
3. Tightening the flare nuts with a driver.
4. Remove the nuts of one-way valve.
5. If possible, evacuate from the one-way valve with a vacuum pump. (Fig.9)
6. Tighten the nuts, then check whether there is gas leaking out.
Electric wiring
1. Read the name plate carefully, then arrange wiring according to the “WIRING DIAGRAM ”
2. A circuit breaker capable of shutting down power supply to the entire system must be installed.
3. Earth properly.
4. All wiring must be performed by a skilled electrician according to the “ WIRING DIAGRAM ”.
Wrong wiring may cause fire of electric shock.
Connect the power connecting wires
1. Remove the front side plate (Fig.10).
2. Break through the hole for wires and put on rubber bush.
3. Pull all wires through the rubber bush.
4. Connect the outdoor unit according to the “WIRING DIAGAM” of outdoor unit.Make sure to wire
firmly.
5. Tighten the wires with clamp and clasp.
Все каталоги и инструкции здесь: http : //splitoff.ru/tehn-doc.html