-
39
-
Model No.: 14LAANZACDC
Version: 1.0
Item Focus
adjustment
Measuring Equipment
SG
Preparation before Adj.
Brightness, contrast and color should be set in standard.
Adjustment procedure
1. Receive the cross-hatch pattern signal.
2. Turn the focus adjusting VR watching the screen and adjust the vertical line of mark to make
the most thin. Then the focus adj. VR is set as close low voltage side as possible.
Stop the focus adj. VR at the point that focus is a bit worse at once, turn back to the left and
then turn back to the right a little again.
