Operating Manual JUPITER 100J & 150J
13 (28)
JUPITER 800/900 100J & 150J
Document-ID: 948681-000
Version: A2
Author: SH
EN
!
Find out where the crane’s main power disconnect is, in order to be able to
quickly switch off if required.
!
Never hand over the transmitter to anyone who has not undergone training
in radio-control crane operation.
!
After completed operation you should always switch the transmitter off
with STOP.
Note! Do not put the transmitter aside without switching the transmitter off
with STOP.
!
The main contactor of the crane is to be switched off after the end of work-
ing hours. The transmitter is then to be kept inaccessible to unauthorized
persons.
!
In case of faults or breakdowns in the radio control equipment the crane
should permit operation from the cab or with suspended operating gear. In
such case first turn the switch from radio operation to manual operation.
Make certain how this switch-over is to be made before you start operating
the crane.
!
Make sure that the receiver can not be activated when you service the
transmitter.
!
When working on the crane ensure that all radio transmitters
and other controls are locked or otherwise under supervision.
ALWAYS REPORT DEFECTS TO THE WORKPLACE MANAGEMENT.
