Akerstroms Tx800 Triton, User Manual

Page: 28 / 58

Installation User Manual Tx800
28 E-EQ-TX800OGWW-D-ARC
4.5 Mounting the port lid
Cut the provided openable cable protection tube to the appropriate length. Put the cables in one half of it
and then put the other half on, according to fig. 9.
Figure 11 Applying the openable cable protection tube
Before mounting the port lid, fit the cable tube in the sockets of the chassis and lid.
Figure 12 Mounting the port lid
The screws used for the port lid should be alternately tightened to provide proper dust and moist protection
(IP65 requirement).
Fasten the cable tube in the vehicle, without putting strain on the tube. Now the Tx800 is ready to be
mounted in the vehicle.