User Manual Tx800
Installation
E-EQ-TX800OGWW-D-ARC 25
Figure 10 Strain relieving brackets for USB and PS/2 connectors
When all peripherals are connected, the cabling should be put in the openable cable
protection tube, delivered with the unit (described in section 4.5).
4.4.2 Supplying power to peripherals
Some peripherals require power from the computer’s COM or Multi Purpose port, for example a bar-code
reader or an illuminated keyboard.
You can configure the Tx800 as follows:
•
12V power is supplied from pin 9 on the COM 2 port.
•
5V power is supplied from pin 9 on the COM 1 port.
•
12V power is supplied from pin 5 on the Multi purpose port.
Peripherals, with maximum power consumption of 300 mA, can be supplied from these ports.
Use the Trux Computer Manager to configure activation of the power supply from ports. Please refer to
the Trux Configuration Guide, available on the documentation CD, for details on using the Trux Computer
Manager.
4.4.3 Keyboard and mouse
Tx800 supports either USB or PS/2 connected keyboard and mouse
Connect keyboards and pointing devices to the computer’s port. Use strain relief according to fig. 8,
section 4.4.1. Note that some require an adapter and others may need additional configuration. Follow the
instructions for the type of keyboard that you have.
4.4.4 Printers
You can connect printers to either:
•
COM ports; see Fig 7, pos. 4 or 5, or
•
USB ports; see Fig 7, pos. 9,
For more information, refer to the printer’s documentation.
The printer will need to be supplied with power separately.
Summary of Contents for Tx800 Triton
