AKCP WTG, Quick Start Manual, Page: 9 / 48

WTG QuickStart Guide
- 9 -
Access over WiFi
Connect your laptop, phone or tablet to the unit’s
Default Access Point with the settings as noted
earlier.
For example if your unit’s MAC ID is 00:0B:DC:01:47:A4 then you need to connect to the
WTG0147A4 wireless network, and use 000BDC0147A4 as the WiFi connection password.
Next open the WebUI using the unit’s default WiFi IP
192.168.250.100 or the hostname akcp.local if
your device supports it.
Open
http://192.168.250.100 or http://akcp.local with a supported browser (Chrome or Firefox).
The rest of the configuration will be the same as described for the wired connection mode: the Setup
wizard will load (which you may skip) and then the WebUI of the unit with the default tutorials.
Note: The WebUI loading speed over WiFi will be slower than the wired connection. Please be
patient.